HPCL Recruitment 2019: Engineers Earn Upto Rs. 18 LPA

By | August 26, 2019

Hindustan Petroleum Corporation Limited (HPCL), a Navratna Public Sector Oil and Natural Gas Company is Owned and Operated by the Government of India. Petroleum, Natural Gas, Petrochemicals, Lubricants etc. are the main products of the company. It is earning annual total revenue of approx US$ 43 Billion. Applications through online mode are invited by the HPCL for recruitment to HPCL Engineers Recruitment 2019B.E. / B.Tech in Electrical & Electronics Engineering / Electronics Engineering / Mechanical Engineering / Civil Engineering / Other Engineering Branches can apply online for this recruitment. 

HPCL Engineers Recruitment 2019

Exam Name: 

HPCL Technical & Other Officers Recruitment 2019.

Organization Name: 

Hindustan Petroleum Corporation Limited (HPCL)

HPCL Engineers Recruitment 2019

Post Advertised: 

HPCL Engineers Recruitment 2019.



4-year full time regular engineering course in Mechanical/Electrical/ Instrumentation/ Civil from AICTE approved / UGC recognized University/Deemed University with minimum 60% marks (aggregate of all semesters/years) for UR/OBCNC/EWS Candidates and 50% for SC/ST/PwBD candidates in Graduation, under the relevant engineering stream for which applied for.

  • Mechanical, Mechanical & Production
  • Civil
  • Electrical
  • Electrical & Electronics
  • Instrumentation
  • Instrumentation & Control
  • Electronics & Instrumentation
  • Instrumentation & Electronics
  • Instrumentation & Process Control


3 years of post-qualification relevant work experience in Supervisory role/Executive category at Project sites at Petroleum/ Refining/ Petrochemical/ Chemical/ Fertilizer / Steel/ Power / Infrastructure sector or Project Service Providers like Project Management Consultants / LSTK Contractors related to the above Sectors.


Minimum 3 Years relevant experience in any one or more of the following fields:

  • Experience of designing of piping, stress analysis, pressure vessels, heat exchanger, make/review detailed fabrication drawings, isometrics, 3-D Models etc. using various mechanical design software.
  • Experience in project execution including understanding specifications, engineering drawings, basic design aspects, quality requirements during construction, erection schemes, various construction equipment, and coordination with PMC/LSTK vendor, work measurements and certification, progress measurement, safety/statutory requirements etc.
  • Experience in contract management including planning, monitoring, engineering/ document control, procurement control, resource control, expediting, billing, etc.
  • Experience in construction management including job & resource planning, quality control, safety, site supervision, structural/ fabrication / erection works like gantry, tank fabrication, pipeline fabrication, Preengineered structures, bridges etc. and structural retrofitting works etc. In addition to above experience the candidate shall be familiar of applicable codes, standards, metallurgy, quality requirements, statutory/safety requirements /guidelines during design, procurement and construction etc.

Also visit:


Minimum 3 Years relevant experience in any one or more of the following fields:

  • Execution of Real Estate Projects / Industrial civil structures like equipment foundations, high rise columns, substation and control room, deep foundation & sumps, equipment foundations, pipe racks, control rooms, substations, office buildings, roads, underground piping, precast concrete works, pipe racks etc.
  • Experience of project execution including understanding of specifications, engineering drawings, basic design aspects, quality requirement during construction, carried out final checks.
  • Fabrication and erection of structures, erection of boiler structure, pressure parts, piping, coalbunker, gas/steam turbine and generator, static & rotary equipment, cooling towers, chimneys and other balance of plant equipment for coal-based / combined cycle power plants. In addition to above experience the candidate shall have knowledge of IS codes for lapping length of rebars, concrete workability & formwork. Piling, civil works for foundations, buildings including finishing works. He shall be Well conversant with guidelines & other statutory safety requirements/guidelines, Quantity / Cost estimation for civil scope of works involved and should have coordinated with various Project sites for Progress Monitoring & timely completion. Candidate should be familiar with reconciliation statements, measurements, monthly bills based on measurements for Contractors / Sub-Contractors.


Minimum 3 Years relevant experience in any one or more of the following fields:

  • Basic system design, equipment specifications, Engineering for Procurement & Construction, technical evaluation of bids, review of vendor drawing & data
  • Experience in erection / installation, Testing & commissioning including troubleshooting of HT & LT power distribution system, equipment like HT/LT motors, substation equipment, start-up devices like VFDs, auto transformers, relay settings and relay coordination, GIS, earthing, lighting, area classifications, flameproof equipment, CPP generation, transformers, switchgears, UPS, cables, industrial illumination system, HVAC, Fire Alarm & Communication In addition to above experience the candidate shall be well conversant with relevant electrical codes / Rules / guidelines / other statutory safety requirements / guidelines, Analysis of individual equipment performance, Preparation of SLDs and Equipment data sheets for new improvement schemes.


Minimum 3 Years relevant experience in any one or more of the following fields: http://ibps.in

  • Experience of instrumentation project execution including making specifications, understanding design aspects, review offers, review technical drawings/documents, construction supervision, pre commissioning checks, commissioning, trouble shooting, coordination with OEMs etc., for execution.
  • Experience of installation & commissioning / repair & maintenance of PLC / DCS systems with or without Emergency features, all kind of Smart, Non Smart, and Foundation Field bus based Field instruments, Control Valves/On-Off Valves and Analyzers, Shutdown System (Honeywell, Yokogawa, Emerson, ABB, Siemens, GE Fanuc, AB Etc.), Control System Networking etc. including calibration of instruments In addition to above, candidate shall be familiar with Specifications, Interlocks, Cause Effect diagrams, Trip Logics, Cable Schedule, Loop / Wiring Diagrams etc., Preparation / Review of technical specifications, P&IDs and PFDs.




4 years’ full time regular BE/BTech in Chemical Engineering (Chemical, Petrochemical, Petroleum Refining & Petrochemical, Petroleum Refining) from AICTE approved / UGC recognized University/Deemed University with minimum 60% marks (aggregate marks of all semesters) for UR/OBCNC/EWS candidates, relaxed to 50% (aggregate marks of all semesters) for SC/ST/PwBD candidates Experience: Minimum 3 years’ experience in Operations/Process in a Large Petrochemical plant or a Major Petrochemical Unit within a petroleum refinery (having turnover of Rs. 500 crores or more) in the areas of

  • Handling normal operations, plant start up and shutdowns
  • Operations of large compressors / blowers / pumps / furnaces/ incinerators
  • Handling chilled water/refrigeration systems
  • Trouble shooting of unit operation, commissioning of units
  • Control systems and with a thorough knowledge and understanding of the P&ID/PFDs
  • Process safety & safety standards
  • Storage and handling of petrochemicals in specially designed storage tanks
  • Process optimization and troubleshooting of process units related issues
  • Petrochemicals dispatch in Tankers/Iso Containers and drums including drumming operations
  • Hazop and risk analysis and design standards / guidelines
  • Process specifications of equipment like columns, vessels, furnaces / burners, heat exchangers, pumps, compressors, measuring and control instruments, heat-mass balance, piping, safety / statutory requirements etc.
  • Pre-commissioning checks, commissioning assistance The experience has to be in the supervisor / executive capacity only. Candidates with experience in other process industries than those mentioned will not be considered. Roles & Responsibilities: The job involves working in three shifts as a field supervisor or control panel (DCS) supervisor in process plants, utility section and tank farm management.

Responsible for safe operation of plant

  • Lead a team of technicians
  • Handle plant start up/shut downs and emergency issues.
  • Trouble shooting and resolving operational issues, etc.

Selection Process: 

Selection of Candidates Will Be Based on Written Exam and / or Interview. 

Application Fees:

 Rs. 590/- for UR / OBC & Rs. 90/- for Other Reserved Category Candidates. 

Last Date of Online Application Through The Link Provided Below:


#Engineering jobs 2019SSC RECRUITMENTSSC(Staff Selection Commission)Junior Engineers RecruitmentSSC(Staff Selection Commission)Recruitment 2019: Junior EngineersEdit#Assistants job recruitment 2019SSC RECRUITMENTSSC recruitment 2019Edit#SSC Inspector recruitmentSSC Job recruitment 2019SSC recruitment 2019Edit

Leave a Reply

Your email address will not be published. Required fields are marked *